Garden
Shed
1.5 x 0.8 x 1.53m
8
A
39C
39D
14J
11S
Step 2:
Assemble the rear wall panels
You will find it easier to assemble your shed using sawhorses with timber studs attached (timber needs to be the same length as the
shed (1.5 M)) or alternatively, a trestle table.
Place parts 14J and 11S (sheeting) on your worktable and join together with the self-tapping screws as per the diagram below.
Now fit parts 39C (top channel) and 39D (bottom channel) to the sheeting by tapping it in (diagram A) or sliding it in (diagram B). Make
sure the small lip of the channel is always facing out. This ensures rainwater cannot build up inside your shed.
ROOF TOP EDGE
RIDGES FACING UP
A
