NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
© 2019 Pinnacle Climate Technologies, Inc.
Turbo Electric Fan Heater User’s Manual
®
OPERATION
Operation
1. Position the fan heater so that it stands upright
on a firm, level surface and at a safe distance
from wet environments and flammable objects.
2. Connect the fan heater to the proper electrical
power. See Grounding instructions
(Page 6, Figure 1).
3. Set the thermostat dial to the maximum
temperature.
4. The fan heater will switch on when the function
selector dial is set to one of the three power
settings.
5. Once the room reaches the desired temperature,
turn the thermostat dial back until heating
element turns off.
Automatic Overheat Safety Control
–
This heater is equipped with safety internal heat
limiting thermostat and overheat protection
circuit. When a potential overheat temperature
is reached, the system will automatically shut the
heater off at 185 ºF
(85 ºC).
Caution Light
–
The Caution Light will illuminate when the
Overheat Safety Control is activated. The heating
element will be shut off until the unit has cooled
to a safe level.
–
The fan will continue to operate.
–
Once the heater has reached a safe level (131 ºF /
55 ºc), the heater will turn back on automatically.
Thermostat Instructions
–
At first, set the thermostat to “+” and let the
heater operate with full power input. When the
room temperature reaches the required value,
turn the thermostat to the left until it switches
off.
–
The thermostat will then switch on and off
automatically to control the room temperature
according to the preset value and keep the room
temperature constant.
–
When using the heater for the first time, you
may notice a slight emission of smoke. This is
quite normal and it stops after a short time. The
heating element is made of steel and was coated
with a layer of protective oil during production.
The smoke is caused by the leftover oil as it is
heated.
Setting
Function
Unit is Off
Fan Runs - No heating
Fan Runs - Full Power Heating
NOTE: The fan will run continuously while the
heater is operating.
5
