background image

Temperature 

Setting 

Kind of Textile 

Label 

Better 

Ironing-methods 

 Synthetic 

 

Dry ironing on the back 
of garment/ i.e. inside 
out. Do not spray water 
directly, or spots will 
appear. 

 

Silk 

 

Dry iron inside out.     

 

 

Nylon 

 

Dry iron inside out. 

 

 

 

Wool 

 

Do not use dry ironing. 

 

 

 Cotton  

 

 

 Linen 

 

Steam Ironing and 
Spraying according to 
thick-thin and folding 
crease of garment. 

 

CARE AND CLEANING   

  Turn the Temperature Control Dial to OFF/MIN, then disconnect the iron from 

the wall outlet and let it cool down completely. 

  Empty any left over water in water tank. 

  Deposits and other residues on the soleplate can be removed with a cloth 

soaked in a vinegar/water solution. 

  The casing may be wiped with a damp cloth and then polished with a dry one. 

  Never use any abrasives to clean the soleplate. 

  Keep the soleplate smooth; avoid contact with metal objects. 

 
If the steam iron does not work as it should; please send it to the distributor for 
examining and repairing. Or contact our SERVICE DEPARTMENT. 

 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for PSI70










Reviews: