16. Do not allow the cord to touch hot surfaces and do not place on or near a
hot gas or electric burner or in a heated oven.
17. Do not use the appliance on a gas or electric cooking top or over or near an
open flame.
18. Use of an extension cord with this appliance is not recommended. However,
if it is necessary to use an extension lead, ensure that the lead is suited to
the power consumption of the appliance to avoid overheating of the
extension cord, appliance or plug point. Do not place the extension cord in
a position where it can be pulled on by children or animals or tripped over.
19. This appliance is not suitable for outdoor use. Do not use this appliance for
anything other than its intended use.
20. DO NOT carry the appliance by the power cord.
21. Do not leave this appliance unattended during use. Always unplug the unit
when not in use or before cleaning.
22. Always operate the appliance on a smooth, even and stable surface. Do
not place the unit on a hot surface.
23. Ensure that the switch is in the “Off”/”MIN” position after each use.
24. The manufacturer does not accept responsibility for any damage or injury
caused by improper or incorrect use, or for repairs carried out by
unauthorised personnel.
25. In case of technical problems, switch off the machine and do not attempt to
repair it yourself. Return the appliance to an authorised service facility for
examination, adjustment or repair. Always insist on the use of original spare
parts. Failure to comply with the abovementioned precautions and
instructions, could affect the safe operation of this machine.
26. When you have finished ironing or when you are leaving iron unattended:
a. set the steam knob to the Off / “O” position by pushing it down, and
the Temperature Control Dial to Off/MIN.
b. stand the iron upright.
c. disconnect the iron from the wall outlet.
27. Do not touch hot metal parts, hot water or steam. These parts become hot
and may cause burns. Take care if you turn the iron upside down: there
may be hot water in the tank.
28. The plug and cord should not be allowed to touch the hot soleplate. Let the
iron cool down completely before taking it away.
NOTE: Some parts of the iron have been slightly greased and as a result the iron
may smoke slightly when switched on for the first time, remove the protective films
or stickers from the sole plate and the cabinet. When using the iron for the first time,
