2017PC-01/09
21
Fig.30
Example:
the stage 1, auto booting time is 07:30, and auto turning
off after 3 hours and 30 minutes.(Fig.30)
6·Pressing
again to set the Stage 2. The
boot time should not be earlier than the auto turning off
time of Stage 1. (Fig. 31)
Fig.31
-Running
1·Finishing the parameter presetting, pressing
return
to standby interface, then, pressing on/off switch and
press Yes start to ignite.and into the running interface
(Fig. 32)
Fig. 32
-QUICK TIMEING
1·Pressing the Timing Off
to start the timing
program (Fig. 33)
Fig.33
2· Pressing the plus
to start the quick timing
function
，
when the quick timing is running, then the
timing program will be stopped, (Fig. 34)
Fig.34
-FACTORY MODE
Factory mode is not opening to the users, if any
requirements about that, or the special fuel, users can
contact the local distributor to get the professional
service.
1 Pressing factory model
and input the password to enter the Factory mode
interface.
