Pima OutView Installation Manual Download Page 9

 

 

9  

The user or installer may find the following booklet prepared by the Federal Communications Commission 
helpful: “Interference Handbook.” This booklet is available from the U.S. Government Printing Office, 
Washington, DC 20402. 

The user shall not make any changes or modifications to the equipment unless authorized by the Installation 
Instructions or User’s Guide. Unauthorized changes or modifications could void the user’s authority to 
operate the equipment. 

 

All data contained herein is subject to change without prior notice. 

Copyright © 2014 by PIMA Electronic Systems Ltd. All rights reserved. E&OE 

This guide and the information contained herein are proprietary to PIMA Electronic Systems Ltd. Only 
PIMA Electronic Systems Ltd. or its customers have the right to use the information.   

No part of this guide may be re-produced or transmitted in any form or by any means, electronic or 
mechanical, for any purpose, without the express written permission of PIMA Electronic Systems Ltd.  

PIMA Electronic Systems Ltd. owns patents and patent applications, trademarks, copyrights, or other 
intellectual property rights covering the subject matter in this guide.  

The furnishing of this guide to any party does not give that party or any third party any license to these 
patents, trademarks, copyrights or other intellectual property rights, except as expressly provided in any 
written agreement of PIMA Electronic Systems Ltd. 

 

 

Summary of Contents for OutView













Reviews: