Captain-i RX-6 User Manual
8
To set the time and date for the system:
[
Primary Code
[
[
2 digits for the current hour
[
[
2 digits for the current minutes
[
[
last 2 digits of the
current year
[
[
2 digits for the current month
[
[
2 digits for the current day
[
[
[
[
.
NOTES:
The time should be in HH:MM 24 hours format (e.g., 22:35).
It is important to set the correct time and date to ensure proper
functioning of your CAPTAIN-i Alarm System.
The system time is not visible but it will be recorded with events
in the system’s memory.
If no time is entered, the CAPTAIN-i Alarm System shall
report a failure
.
The CAPTAIN-i Alarm System will not accept meaningless data.
For example, if you enter 25:25 for the hour, the programming will
be stopped automatically, and you will have to start the procedure
from the beginning.
To program/cancel a Chime Zone:
[
Primary Code
[
[
zone number
[
NOTE:
This mode activates a buzzer in the keypad when a Chime Zone is
triggered. There is no visible indication of Chime Zones on the RX-6
Keypad.
X
X
X
X
8
P
/N
4
4102
07 Rev
. B (
D
ec
-20
06)