Captain-i RX-6 User Manual
5
NOTE:
You can customize your system's response to a panic event, for example,
calling the Monitoring Station or your private telephone number. Consult
your installer about programming a Panic Response.
Initiate FIRE Response:
Press and hold
and
simultaneously for two seconds.
Initiate EMERGENCY Response:
Press and hold
and
simultaneously for two seconds.
To Disable all keypad audible tones:
Press and hold
and
simultaneously.
NOTE:
When the keypad's Audible Tone feature is disabled,
all
audible tones and
indications, with that keypad, are silenced.
Enable keypad audible tones:
Press and hold
and
simultaneously until you hear a beep.
P
ROGRAMMING
F
UNCTIONS
IMPORTANT!
Before beginning to program the CAPTAIN-i Alarm System, you must first
enter the Primary Code (the default factory code is 5555).
There is NO special indication that you are in Programming Mode and NO
confirmation tone for entering data.
To cancel a command:
[
[
[
, then start the programming procedure from the
beginning.
To program a Primary Code:
[
Initial Primary Code
[
[
[
new Primary Code (4-6 digits)
[
[
[
[
To program User Code #1:
[
New Primary Code
[
[
[
[
new User Code
(4-6
digits)
[
[
[
[
>>
9
X
X
X
X
X
X
9
X
X
X
X
X
6
4
9
7