Pilz PSSuniversal multi PSSu H m F DP ETH SD, Operating Manual

Page: 32 / 35

Technical details
Operating Manual PSSu H m F DP ETH SD
1002323­EN­04
32
PROFIBUS DP interface
Transmission rate selectable via automatisch
Connection 9­pin female D­Sub connector
Protocol DPV0
Operating modes AutoBaud, Freeze Mode, Set Slave Address, Sync
Mode
Certification PNO
Description file Pilz0CB0.gsd
Manufacturer’s ID 0CB0h
Cycle time (t_ExtCo) 2...300 000 ms
Ethernet interface
Number 1
IP address (automatically off) 169.254.X.Y
Connection type RJ45
Transmission rate 100 MBit/s
Environmental data
Climatic suitability EN 60068­2­1, EN 60068­2­14, EN 60068­2­2, EN
60068­2­30, EN 60068­2­78
Ambient temperature
Temperature range 0 ­ 60 °C
Storage temperature
Temperature range ­25 ­ 70 °C
Climatic suitability
In accordance with the standard EN 60068­2­78
Humidity 93 % r. h. at 40 °C
Condensation during operation Not permitted
EMC EN 61000­4­2, EN 61000­4­3, EN 61000­4­4, EN
61000­4­5, EN 61000­4­6, EN 61000­6­2, EN
61000­6­4
Vibration
In accordance with the standard EN 60068­2­6
Frequency 10,0 ­ 55,0 Hz
Amplitude 0,35 mm
Acceleration 1g
Shock stress
In accordance with the standard EN 60068­2­27
Number of shocks 6
Acceleration 15g
Duration 11 ms
In accordance with the standard EN 60068­2­27
Number of shocks 1000
Acceleration 10g
Duration 16 ms
Max. operating height above sea level 2000 m