background image

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-3

1.3

Definition of symbols

1

Introduction

1.3

Definition of symbols

1300

Definition of symbols

1-

Einfhrung Zeichen

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation 

that poses an immediate threat of serious injury and death and 

indicates preventive measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation 

that could lead to serious injury and death and indicates preven-

tive measures that can be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor 

injury plus material damage, and also provides information on 

preventive measures that can be taken.

NOTICE

This describes a situation in which the unit(s) could be damaged 

and also provides information on preventive measures that can 

be taken. It also highlights areas within the text that are of partic-

ular importance.

INFORMATION

This gives advice on applications and provides information on 

special features.

Summary of Contents for PSSu H SB




































Reviews: