Pilz PSSnet GW1 MOD--CAN, Operating Manual

Page: 39 / 42

Technical Details
Operating Manual PSSnet GW1 MOD­EtherCAT
1002692­EN­03
39
Environmental data
Climatic suitability
In accordance with the standard EN 60068­2­30, EN 60068­2­78
Humidity
93 % r. h. at 40 °C
Condensation during operation Not permitted
EMC EN 61131­2
Vibration
In accordance with the standard
EN 60068­2­6
Frequency 5 ­ 150 Hz
Acceleration
1g
Shock stress
In accordance with the standard EN 60068­2­27
Acceleration
15g
Duration 11 ms
Max. operating height above sea level 2000 m
Airgap creepage
In accordance with the standard EN 61131­2
Overvoltage category II
Protection type
In accordance with the standard EN 60529
Mounting area (e.g. control cabinet) IP54
Housing IP20
Terminals IP20
Potential isolation
Potential isolation between
EtherCAT and system voltage
Type of potential isolation Functional insulation
Rated surge voltage 500 V
Potential isolation between Modbus and system voltage
Type of potential isolation
Functional insulation
Rated surge voltage 500 V
Mechanical data
DIN rail
Top hat rail 35 x 7,5 EN 50022
Material
Bottom PC
Front PC
Connection type Spring­loaded terminal, plug­in, screw terminal,
plug­in
Conductor cross section with screw terminals
1 core flexible 0,25 ­ 2,5 mm², 24 ­ 12 AWG
2 core with the same cross section, flexible without
crimp connectors or with TWIN crimp connectors 0,2 ­ 1,5 mm², 24 ­ 16 AWG
Torque setting with screw terminals 0,5 Nm
Conductor cross section with spring­loaded terminals:
Flexible with/without crimp connector 0,2 ­ 2,5 mm², 24 ­ 12 AWG
Spring­loaded terminals: Terminal points per connec­
tion 2