![Pilz PSEN sl-0.5p 1.1 Operating Manual Download Page 32](http://html1.mh-extra.com/html/pilz/psen-sl-0-5p-1-1/psen-sl-0-5p-1-1_operating-manual_1556616032.webp)
PSEN sl-0.5p 1.1
Operating Manual PSEN sl-0.5p 1.1
21904-EN-10
32
Mechanical data
Material
Top
PBT
Anchor plate
Nickel-plated steel
Base plate
Anticorodal, hard anodised
Actuator
Anticorodal, hard anodised
Max. torque setting for fixing screws
3 Nm
Dimensions
Height
122 mm
Width
45 mm
Depth
44 mm
Actuator dimensions
Height
138 mm
Width
52 mm
Depth
23 mm
Weight of safety switch
570 g
Weight of actuator
365 g
Weight
940 g
Where standards are undated, the 2015-04 latest editions shall apply.
Supplementary data
Radio approval
USA/Canada
FCC ID:
IC:
FCC/IC-Requirements:
This product complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standards.
Operation is subject to the following two conditions:
1) this product may not cause harmful interference, and
2) this product must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this product not expressly approved by Pilz may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Le présent produit est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) le produit ne doit pas produire de brouillage, et
(2) l'utilisateur de le produit doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
VT8-PSENSLP
7482A-PSENSLP