PNOZ XV3.3P
Operating Manual PNOZ XV3.3P
20777-EN-09
| 7
Unit features
}
Positive-guided relay outputs:
– 3 safety contacts (N/O), instantaneous
– 2 safety contacts (N/O), delay-on de-energisation
}
Connection options for:
– E-STOP pushbutton
– Safety gate limit switch
– Start button
}
Selectable delay time
}
Possible to cancel delay time
}
LED display for:
– Supply voltage
– Switch state of the safety contacts
– Start circuit
}
Plug-in connection terminals (either spring-loaded terminal or screw terminal)
}
See order reference for unit types
Safety features
The safety relay meets the following safety requirements:
}
The circuit is redundant with built-in self-monitoring.
}
The safety function remains effective in the case of a component failure.
}
The correct opening and closing of the safety function relays is tested automatically in
each on-off cycle.
Block diagram/terminal configuration
*Insulation between the non-marked area and the relay contacts: Basic insulation (over-
voltage category III), Protective separation (overvoltage category II)
