Operation
Operating Manual PNOZ m EF SafetyNET
1004535-EN-03
| 21
7
Operation
When the supply voltage is switched on, the PNOZmulti safety system copies the configur-
ation from the chip card or USB memory.
The LEDs “POWER”, “DIAG”, “FAULT”, “IFAULT” and “OFAULT” will light up on the base
unit.
7.1
LED indicators
Legend
LED on
LED flashes
1
LED flashes 1x
LED off
LEDs
Description
Power
Run
Diag
Fault
RTFL
L/A 1
L/A 2
Supply voltage is present.
Supply voltage is not present.
Module runs error-free.
The module is in stop state.
The module is in operational state.
The module is in pre-operational state.
Periphery error. Module continues to run.
Periphery error. The module is in stop state (safe state).
Internal module error. Contact Pilz.
Ethernet connection available at X1.
No Ethernet connection available at X1.
Ethernet connection available at X2.
No Ethernet connection available at X2.
SafetyNET p RTFL connection has been established.
No data connection via SafetyNET p RTFL.
1
The module is reached by the bus master when establishing the
SafetyNET p RTFL connection.
All subscribers are synchronised when establishing the SafetyNET p
RTFL connection.
