PIT gb
Operating Manual PIT gb
1004627-EN-02
15
Attach coloured caps
Apply the coloured cap (provided) to the control element and press on the coloured cap un-
til it noticeably engages.
Ensure that the alignment marking on the coloured cap (see figure) is aligned flush with the
PIT gb or at a 90° angle to this.
[1]
Legend
[1] Alignment marking
Commissioning
Connection to evaluation device
Suitable Pilz evaluation devices for the actuation of the LED and reading out all control ele-
ments include:
}
PNOZmulti
}
PSSuniversal PLC
Suitable Pilz evaluation devices for the evaluation of the E-STOP:
}
PNOZelog
}
PNOZsigma
}
PNOZ X
The correct connection to the respective evaluation device is described in the operating
manual for the evaluation device. Make sure that the connection is made in accordance
with the specifications in the operating manual for the selected evaluation device.
Checking the unit
Once the unit has been installed and aligned, final inspections must be carried out before it
can be put into service.
INFORMATION
This inspection may only be carried out by qualified personnel.
