Pilz 773 632, Operating Manual, Page: 15 / 20

PNOZ po3.3p
Operating Manual PNOZ po3.3p
20678-EN-07
15
Conventional thermal current while loading sev-
eral contacts
Ith per contact at UB DC; AC1: 400 V
Conv. therm. current with 1 contact 10 A
Conv. therm. current with 2 contacts 10 A
Conv. therm. current with 3 contacts 7,5 A
Ith per contact at UB DC AC1: 500 V
Conv. therm. current with 1 contact 8 A
Conv. therm. current with 2 contacts 8 A
Conv. therm. current with 3 contacts 6 A
Times
Switch-on delay
With automatic start typ. 15 ms
With automatic start max. 30 ms
With automatic start after power on typ. 90 ms
With automatic start after power on max. 150 ms
Delay-on de-energisation
With E-STOP typ. 40 ms
With E-STOP max. 60 ms
With power failure typ. 30 ms
With power failure max. 50 ms
Environmental data
Climatic suitability EN 60068-2-78
Ambient temperature
Temperature range -10 - 55 °C
Storage temperature
Temperature range -40 - 85 °C
Climatic suitability
Humidity 93 % r. h. at 40 °C
Condensation during operation Not permitted
EMC EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN
61326-3-1
Vibration
In accordance with the standard EN 60068-2-6
Frequency 10 - 55 Hz
Amplitude 0,35 mm
Airgap creepage
In accordance with the standard EN 60947-1
Overvoltage category III
Pollution degree 2
Rated insulation voltage 400 V
Rated impulse withstand voltage 6 kV
Protection type
Mounting area (e.g. control cabinet) IP54
Housing IP30
Terminals IP20