Pilz 542 113, Operating Manual, Page: 18 / 29

PSEN cs6.11n
Operating Manual PSEN cs6.11n
1004127-EN-03
18
[4]
DEVICE
SAFETY GATE
INPUT
DEVICE
SAFETY GATE
INPUT
Fig.: Applying the screw cover [4] on the switch
[1]
[4]
[3]
[2]
Fig.: Applying the screw covers [1] and [3] on the actuator
Procedure:
1. Drill holes (for M4 screws) in the mounting surface to secure the actuator and sensor
(see Dimensions in mm [ 21] ).
2. Use a screw to fix the sensor to the mounting surface.
Make sure that the square marking on the sensor can be operated using the actuator
from the right side.
3. Do not fully tighten the second screw on the safety switch.
4. Use a screw to fix the actuator to the mounting surface.
Make sure that the actuator with the triangle marking points towards the triangle mark-
ing on the sensor.
5. Do not fully tighten the second screw on the actuator.