Turning on the Tx
ATTENTION! The Tx of this model includes a safety feature to prevent an accidental start of the motor. Please carefully review the
flowing instructions.
1. Move the Throttle/Blade Pitch stick to the lowest setting (all the way down).
Double check that the Flight Mode Toggle is set at NOR.
2. Turn the Tx on.
3. Remove the motor cut safety:
a. If the GEAR toggle switch is in the up position (closest to you) remove the safety by switching it to the down (further
away from yourself) position.
b. If the GEAR toggle switch is in the down position, remove the safety by switching the toggle up and then back to the
down position.
c.
After the safety is removed the motor is now activated and any throttle inputs will cause the motor to turn the rotor
blades.
Changing and Default DIP Switch Positions
Below is listed the name and default setting of the dip switches on the Tx. Changing the dip switch settings to any other
configuration will cause the model to behave in a unpredictable or strange manner. This could lead to the model becoming
damaged or personal injury.
The dip switch settings are set at the factory by a qualified specialist. We firmly suggest that any changes to the dip switch
settings are done by an experienced modeler or service center technician.
1
2
3
4
5
6
7
8
9
10
www.pilotage-rc.com
9
Summary of Contents for Stinger 3D 250
