5
Landing Gear Assembly
1, Install the servo to the nose
landing gear.
2. Install the servo arm and push
rod. Adjust to make the plane can go
straight approx. You still can adjust
by radio after install it.
4. The other items connect as the
photo shows. These items was put
under the canopy. You need to check
the tube length before you cut it.
Please note the connection from the
retract valve to the cylinder. Three
cylinder orange tubes must connect
to the orange tubes in the valve.
Three cylinder green tubes must
connect to the green tubes in the
valve.
3. Connect the air tube to the retract
gear as the photo shows. Note to use
the different color tube. Red for brake,
green and orange for the retract gear.
Check valve
Brake valve
Connect to brake
wheel
retract valve
Air Pressure Guage
Connect to the
orange tube in
retract cylinder.
Connect to the
green tube in
retract cylinder.