Screw (2x10mm)
Nut (2mm)
Washer (2x6mm)
Rod (2x800mm)
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Set screw (3x4mm)
Washer (2mm)
Set screw (3x4mm)
1
1
1
1
Install the servo of the elevator
Assemble the elevator servo in the fuselage.
Lock the linkage to the control horn with screws and nuts
as below.
Epoxy the fairing sheet to the slots in the fuselage as
illustration.
2
Pin hinge(24x24mm)
1
Washer(2x6mm)
Screw (2x10mm)
1
1
Clevis
1
Control horn
1
Rod (1.7x700mm)
Linkage Stopper
1
Accessory list for the coming installation steps.
Epoxy the vertical fin to the fuselage steadily.
1
Nut (2mm )
5
26
25
22
24
23
2
Steel wire (0.5x900mm)
Assemble the steeling fullarm around the landing gear.
2
2
2
Clevis
Copper joiner
Aluminum tube
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x6mm)
Steel wire
Copper joiner
Aluminum tube
Lock Nut (2mm )
Screw (2x10mm)
Clevis
Washer(2x6mm)
Install the servo for the nose gear.
Assemble the nose gear servo to the relevant position in
the fuselage.
110mm
The front view of the engine install completion.
The side view of the engine install completion.
4
Blind Nut (4mm)
1
Engine mount (52x86mm)
Linkage Stopper
4
4
20
4
Washer(4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
2
12
Screw (4x20mm)
2
Plastic tube (2x400mm)
1
Rod (2x200mm)
Fuel tank (260cc)
1
Motor mount box
1
Cable tie
2
Accessory list for the coming installation steps.
8
41
38
40
42
39
