background image

PC - 21

Specification:

Length:          1624mm(64

)

Wing span:     1397mm(55

)

Wing area:      34.6sq.dm (3.72sq.ft)

Wing loading:  89.6g/sq.dm(29.4oz/sq.ft)

Flying weight:  3.1kg(6.8lbs)

Radio:             6ch & 6servos

Engine:            4-cycle 52-70

                       2-cycle 40-52

Motors:            4250 510KV

ESC:               60A

Battery:           6S 2200MAH 20C

Propeller:        14*7

SAFETY PRECAUTIONS

INSTRUCTION MANUAL

First-time builders should seek advice from people having building 

experience.If misused or abused,it can cause serious bodily injury 

and damage to property.

Fly only in open areas and preferably at a dedicated R/C flying site.

We suggest having a qualified instructor carefully inspect your 

airplane before its first flight.Please carefully read and follow all 

instructions included with this airplane,your radio control system 

and any other components purchased separately.

(The people under 18 years old is forbidden from flying this model)

This R/C airplane is not  a toy!

Centre of the Gravity.

Adjustment of the rudder, be sure it can work perfectly.

The side view once the model plane assemble completely.

Adjustment of the elevator,be sure it can work perfectly.

Adjustment of the aileron and flap,be sure they can work 

perfectly.

25mm

25mm

AILERON

Side View 

30mm

FLAP

AILERON

AILERON

Right view

Side View 

30mm

30mm

RUDDER

ELEVATOR

Side View 

25mm

25mm

Top view

Position for

right diagram.

96mm

71

72

75

73

74

14

Summary of Contents for PC - 21









Reviews: