Pikkerton XBS-200, User Manual, Page: 13 / 21

XBS-200
User Manual
Version 02
4.1.3 Rename/Move Files
Rename files:
console> mv old.txt new.txt
Move files to the secure-partition:
console> sec file.txt
4.1.4 Cat files
Useful to check Log-Files:
console> cat system.log
4.1.5 Show hexdumps of a file
console> hex system.log
4.1.6 Check sensor values
Displays the current sensor data for all existing and activated sensors.
console> sensors
BRI: Sensor not active
UVI: Sensor not active
PRES: 101839.695 Pa
TEM: 25.528 °C
HUM: 25.993 %
ECO2: 400.000 ppm
TVOC: 0.000 ppm
ACC: Sensor NOT FOUND!!!!!!!!!
Not existing sensors are marked with :
Sensor NOT FOUND!!!!!!!!!
Not activated sensors are marked with :
Sensor not active.
If sensors are activated / deactivated, a reset is necessary to make the apply changes. After a reset
the sensors-command shows updated informations.
© 2020 pikkerton GmbH XBS-200_Manual_v02.odt Page 13/21