Pik Rite Hydra-Pull HP-500, Operation And Parts Manual

Page: 25 / 114

Pik Rite Inc. | HP500 Manure Spreader 2021 | 25
LUBRICATION AND MAINTENANCE
LUBRICATING AND MAINTAINING
SPREADER
Help prevent personal injury caused by unexpected movement
of the machine. If spreader is connected to tractor, disengage
PTO, engage parking brake and/or place transmission in
“PARK”, shut off engine, and remove key. If spreader is
detached, block wheels and use safety stands.
Replace all shields after lubricating or servicing.
OBSERVING INTERVALS
The intervals recommended are based on normal conditions. Severe
or unusual conditions may require more frequent attention.
SELECTING GREASE
Depending upon the expected air temperature range during the
service interval, use grease as shown on the adjusting temperature
chart.
SAE-Multipurpose High Temperature Grease with Extreme Pressure
[EP] Performance with 3 to 5% molybdenum disulfide.
Moly-type grease is recommended, however, if not available,
multipurpose grease is acceptable.
SELECTING GEAR CASE OIL
Depending upon the expected air temperature range during the
drain internal, use oil viscosity shown on the adjoining temperature
chart.
•
API Service Classification GL-5
•
Military Specification MIL-L-2105B
•
Military Specification MIL-L-2105C
At temperatures below -35

[-31

], use arctic oils such as those
meeting Military Specifications MIL-G-10324A.