Pik Rite Hydra-Pull HP-500, Operation And Parts Manual

Page: 18 / 114

18 | HP500 Manure Spreader 2021 | Pik Rite Inc.
ATTACHING THE SPREADER
ATTACHING THE SPREADER
Help prevent personal injury caused by unexpected
movement of the machine. Engage parking brake
and/or place transmission in “PARK”, shut off engine,
and remove key before working around hitch.
1. Attach with a 1-1/2 in. pin and secure.
Shorten safety chain to allow only
enough slack required for turning.
2. Lock safety hook onto chain.
CONNECTING AIR HOSES
(AIR ASSIST BRAKES)
1. Connect red line to supply port.
2. Connect blue line to service/control port.
CONNECTING HOSES
(HYDRAULIC BRAKES)
1. Connect pressure hoses to pressure ports of hydraulic
remote coupler.
2. Connect return hoses to return ports of hydraulic remote
coupler.
(Relief factory set 1000psi)
ATTACHING DRIVELINE
Avoid causing damage to shielding,
DO NOT use bell on driveline to lift driveline into position.
1. Support driveline, cradling it in your hand.
2. Rotate driveline (C) or tractor PTO (B) to align splines.
3. Pull collar (C) rearward and push forward on bell (A)
to engage driveline yoke with tractor PTO (B).
4. Pull back on PTO driveline shielding to be sure driveline
is locked. DO NOT pull on collar, this will release latch.