p i g t r o n i x . c o m
|
21
20 |
p i g t r o n i x . c o m
E c h o l u t i o n 2 | E c h o l u t i o n 2 D e l u x e
E c h o l u t i o n 2 | E c h o l u t i o n 2 D e l u x e
The PRESET knob is a rotary push button encoder that facilitates saving and loading of presets. A complete
list of all 60 default presets can be found at the end of this manual.
On power up, the unit will load preset 0 in Bank 0. Turning the preset encoder clockwise scrolls through
preset numbers 1-9 in Bank 0. Going beyond preset 9 in Bank 0 takes you into preset 0-9 of Bank 1 and
so forth. The current Bank is indicated by the upper right light bar, where no lights indicates Bank 0, one
light indicates Bank 1, two lights indicates Bank 2 etc…
PRESET LOADING
To Load a preset, turn the preset knob to select the desired number, the digit will flash. When you have
arrived at the desired destination, push down the preset knob to load that preset.
Note: Upon switching presets, a new Tap Tempo will be loaded, associated with that preset. In order to bypass this
to keep a constant Global Tap, engage Global Tap. See ‘Footswitches’ for more information
.
PRESET SAVING
To Save a preset you have created, push and HOLD the preset knob for 1 second, until the digit begins
flashing. Turn the preset knob to select the preset number where you want to save the sound and then push
down and HOLD the preset knob for 1 second to finalize the save.
The decimal point will illuminate to indicate that preset is present in any given number/bank. When changes
have been made but not saved, the decimal point will flash. If you want to keep your changes, simply follow
the save process explained above without changing the selected bank.
PRESET COPY
To Copy a preset from one bank to another simply initiate the save process as explained above and save
to any slot you wish.
PRESET SELECT USING THE ON-BOARD FOOTSWITCHES
Hold TAP TEMPO to enter PRESET SELECT mode. The preset digit will begin blinking. A SHORT PRESS on the
Tap Tempo switch moves up one preset. A LONG PRESS moves down one preset. Pressing ENGAGE activates the
chosen preset. When pressing the ENGAGE switch to activate a new preset, the BYPASS status will not change.
Note: When switching between vastly different sounds, the Echolution 2 will automatically “teleport” taps, making
a seamless transition, instantly changing the Tap Tempo without pitch changes.
FACTORY RESET
Holding down both footswitches during power up will result in a factory reset, restoring all 60 original
Echolution 2 presets.
WARNING: Performing a factory reset will erase all custom preset data stored to the Echolution 2.
PRESETS
E2R REMOTE SWITCH
Preset Load using the optional E2R Remote Switch
SHORT PRESS
on the left footswitch of the E2R will instantly load preset 1 in the
current bank.
SHORT PRESS
on the left footswitch again will instantly load preset 2 in the current bank.
LONG PRESS
on the left footswitch moves up one bank (indicated by upper right light bar).
SHORT PRESS
on the right footswitch of the E2R will instantly load preset 3 in the
current bank.
SHORT PRESS
on the right footswitch again will instantly load preset 4 in the current bank.
LONG PRESS
on the right footswitch moves down bank (indicated by upper right light bar).
