8
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6054
2. Push the supply lever on the valve down
so it is horizontal and the gas flow is
stopped.
3. Beneath the level is the release button.
Press this firmly and lift away the valve.
4. If the cylinder has a dust-cap secure it
now.
Removing Irish Regulator Fittings:
1. Make sure that the regulator switch is
flame side down (flame not visible).
2. Place your fingers around the bottom
of the valve and firmly pull up. This will
release the valve.
3. If the cylinder has a dust-cap secure it
now.
CLEANING AND CARE
• Ensure that the unit is cool enough to
work on.
• To remove the dust, wipe the appliance
with a dry cloth
• Never use abrasive powders or solvents.
• If the heater shows any signs of wear or
damage disconnect immediately from
the gas supply, do NOT use it – have it
checked by a suitably qualified person.
WARNING:
DO NOT IMMERSE THE UNIT IN WATER
