8
Customer support team:
+44 (0) 333 220 6054
13.
Push the fan blade along the motor shaft
until slots into the positioning bars.
14.
Place the fan lock over the top of the
fan blade and turn it anti-clockwise to
tighten.
15.
Place the decorative front panel on the
recessed groove on the outside of the
front guard. Then fasten the decorative
panel to the front guard from the inside,
using the screws provided.
16.
Hang the front guard to the rear guard
using the position fixer on its rim.
17.
Clamp the two guards together using the
clips found around the front guard rim.
18.
Secure the guard with the screws
provided.
19.
Your fan is now ready for use.
Using your appliance:
Choose one of the following 4 buttons on the
control panel to select the required fan speed
0 =
stop
1 =
minimum
2 =
medium
3 =
high
Oscillation:
Push down the oscillation button to activate
the oscillation function. Pull the button back
up to stop the oscillation.
Cleaning and care:
•
Before cleaning always switch off the
appliance and remove the plug from the
electrical socket.
•
To clean the outside of the fan, wipe the
exterior with a soft, damp cloth.
•
Never use an abrasive cleaner.
•
When not in use, store the fan (preferably
in its original box) in a cool, clean and dry
location.
