6)When using the Steam Mop on carpet surfaces: Place the Mop Head,
with Microfiber Cloth in place, on top of the carpet glider as illustrated in Fig. 6a.
Do not attempt to use the Steam Mop unit on carpet/rug surfaces without
the carpet glider in place.
Notice:
Never use the carpet glider on surfaces that are prone to scratching.
CAUTION
Never assemble or remove the accessories while the unit is in operation
Insert the Power Supply Cord into the
Cord Holder located at the top of the
Extension Handle as illustrated in Fig.4c
and then insert Power Supply Cord
into the
Upper Cord Wrap as illustrated in Fig.
4d.
5)Place the Mircofiber Cloth on the
bottom of the Mop Head and make
sure all the loops on the cloth are
aligned with the gripping hooks on the
bottom of the Mop Head (Refer to
Fig.5a),then press the cloth against the
Mop Head so the loops on the cloth
catch the gripping strips on the Mop
Head and hold the pieces together.
HOW TO USE THE STEAM MOP
PLEASE READ BEFORE USING THE STEAM MOP
The Steam Mop is designed to thoroughly clean floor surfaces, such as marble,
ceramic, carpet, stone, linoleum, and sealed hardwood floors and parquet.
Not all floor types are suitable for steam cleaning
.
The heat and steam action my remove the wax on surfaces treated with wax. Do not
use on unsealed flooring or let unit stand on any wood or heat sensitive floor for an
extended period of time. This could cause the wood grain to rise, in addition to other
types of damage.
When using on vinyl, linoleum or any other heat sensitive floors, use extra caution.
Too much heat can melt glue in the flooring. Use only on laminated flooring that has
been laid professionally and without any gaps or cracks that would permit the entry
of moisture.
Test the Steam Mop on a small isolated area of your flooring prior to overall use on
any floor surface.
Always check the use and care instructions of your flooring manufacturer or distribu-
tor before using the Steam Mop.
When in doubt,please consult a flooring specialist. Only use the carpet glider
on carpeting and rugs
Use of the carpet glider on other floor surfaces will cause streaking and possibly
scratching.
NOTICE
This product emits steam and creates moisture. Water marks, discolouration
or damage to the floor surface can occur if the unit is left operating too long
in one place.