17
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
6. maintenance and inspection
Before cleaning the exterior box of the voltage amplifier, turn off the power switch
and unplug the power plug. Failure to do so may result in a fire or electrical
shock.
Clean the exterior box using a damp cloth that has been firmly wrung-out. Do not
use alcohols, benzene, paint thinner, or other inflammable substances. If
flammable substances come into contact with an electrical component inside the
voltage amplifier, it may result in a fire or electrical shock.
7. instructions for checking
When you open the package, please check to make sure all the necessary parts
are complete (see packing list) and nothing is damaged.
If there is any damage to the system please contact our local representative
immediately! If the packaging material is damaged please confirm this with the
shipping company.
8. overview
Depending on the type of the fiber, the switches are suitable for the spectral
range of 180
nm…2600 nm. The insertion losses are in the range of 1.4…3.5 dB.
The fibers are moved utilizing piezo-bending actuators. Typical switching time is
2…10 ms.
A complete switch consists of casing, fibers, and fiber connectors.
piezosystem
jena
is able to deliver switches equipped with the following standard fiber types:
400/440 µm
600/720 µm
The control voltage must be in the range determined in the technical data. Any
other values will cause the switch to work improperly.
