![piezosystem 12V40 Series Instruction Manual Download Page 22](http://html.mh-extra.com/html/piezosystem/12v40-series/12v40-series_instruction-manual_1555830022.webp)
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
22
Please
note
that after a long period of storage, the piezo stack in your piezo
actuator might experience a certain extent of depolarization. Your amplifier is
equipped with a soft start function, which, after switching on, slowly goes
through the whole motion range once. This corrects any depolarization effects
which might have occurred.
If your application does not allow such a procedure, please let us know.
This function can only be deactivated at
piezosystem jena
.
5. Safety instructions
Icons:
RISK OF ELECTRIC SHOCK! Indicates that a risk of electric shock is
present and the associated warning should be observed.
CAUTION! REFER TO OPERATOR´S MANUAL
– Refer to your
operator’s manual for additional information, such as important
operating and maintenance instructions.
RISK OF ELECTRIC SHOCK!
Do not open the units! There are no user serviceable parts inside. Opening
or removing covers may expose you to dangerous shock hazards or other
risks. For servicing please refer to qualified service personnel.
Do not spill any liquids into the cabinet or use the units near water.
CAUTION
!
Allow adequate ventilation around the units so that heat can properly
dissipate. Do not block ventilated openings or place the units near a
radiator, oven, or other heat sources. Do not put anything on top of the units
except accessories designed for that purpose (e.g. actuators).
Only work with the units in a clean and dry environment! Only specially
prepared units (e.g. actuators) can work under other conditions!
Please only use original parts from
piezosystem jena
.
piezosystem jena
does not give any warranty for damages or malfunction caused by additional
parts not supplied by
piezosystem jena
. Additional cables or connectors
will change the calibration and other specified data. This can change the
specified properties of the units and cause them to malfunction.
Piezoelements are sensitive systems capable of the highest positioning
accuracy. They will only demonstrate their excellent properties if they are