2.
Enter a valid frequency with the numeric pad and press the ENT key.
3.
Select a mode, USB, AM, LSB, your choice.
4.
Set the VFO B info to that of VFO A by pressing the A=B button.
5.
Save this frequency data to memory by pressing the WRITE key.
6.
Preset the 32 memory channels in the normal fashion. If you haven’t set a
particular memory channels data, but try to recall it, the display may show an
improper frequency or mode.
Figure 2. PIEXX ICOMPROM board Installed in the R71A Receiver
Jumpers
Unless otherwise noted, the ICOMPROM board is shipped with the
jumpers set for the IC-751 / IC-751A transceiver.
JP1
JP2
JP3
JP4
Radio
OUT
OUT
OUT
OUT
R71
IN
OUT
OUT
OUT
IC-745
OUT
IN
OUT
OUT
IC-751/IC-751A
IN
IN
OUT
OUT
IC-271A
OUT
OUT
IN
OUT
IC-471A
IN
OUT
IN
OUT
IC-1271A
