PIETRO FIORENTINI MODUS A, Technical Manual

Page: 24 / 25

MT339-I Rev.0.3 08/04/2022
24 - 25
Document classified as: 2 - Company Confidential
Note 1:
The capacity Ci that MODUS presents externally is a function of the applied voltage Ui: the
considerations that led to these values are described in the technical note filed with the Notified Body
that issued the type certificate.
The following two tables show the Ci values as a function of the applied voltage:
Voltage
V
Version A
and T
Ci (μF)
8,7 450
9 225
10 45
11 27
12 16,2
13 10.2
14 7,66
15 6,3
Table 11-18
Table 11-19
11.2 Power supply line characteristic parameters
11.2.1 External Battery – A version
if you decide to power the modem section of MODUS version A with an external battery pack, the
following characteristic parameters must be taken into consideration:
Parameter Uo Io Po Ui Ii Pi Co Lo Ci Li
Value NA NA NA 5,9V 3,9A 5,76W NA NA 880 μF 5μH
Table 11-1
11.2.2 External power supply using M-POWER – T version
MODUS T version can be powered by the M-Power remote power supply.
In this version the modem must be exclusively of the SE13358 type and cannot be replaced in
any way by another type of modem, also the radio module CANNOT be installed.
Characteristic parameters of the CPU power supply line:
Parameter Uo Io Po Ui Ii Pi Co Lo Ci Li
Value NA NA NA 5,9V 0,6A N.A NA NA 880 μF 50nH
Table 11-2
Characteristic parameters of the MODEM power supply line:
Parameter Uo Io Po Ui Ii Pi Co Lo Ci Li
Value NA NA NA 5,9V 3,9A 5,76W NA NA 880 μF 50nH
Table 11-3
Voltage
V
Vee B
Version B
Ci ( μ F)
6 85
7 25,8
8 8,5
9 3,4
10 1,86
11 1,18
12 0,77
13 0,53
14 0,4
15 0,31