147
DIV
AL 600
Use, maintenance and warning instructions
MEDIUM PRESSURE REGULATOR
|
UNINSTALLATION AND DISPOSAL
|
REV. A
EN
11 - UNINSTALLATION AND DISPOSAL
11.1 - GENERAL SAFETY WARNINGS
HAZARD!
Make sure that there are no potentially explosive ignition sources in the work area set up to uninstall and/
or dispose of the equipment.
WARNING!
Before proceeding with uninstallation and disposal, make the equipment safe by disconnecting it from any
power supply.
11.2 - QUALIFICATION OF THE OPERATORS IN CHARGE
Commissioning
Operator qualification
Installer
PPE required
WARNING!
The PPE listed in this table is related to the risk associated with the equipment.
For the PPE required to protect against risks associated with the workplace,
installation or operating conditions, please refer to:
•
the regulations in force in the country of installation;
•
any information provided by the Safety Manager at the installation facility.
Equipment
required
Please refer to the chapter “7 - Commissioning/maintenance equipment”.
Tab. 11.70
11.3 - UNINSTALLATION
ATTENTION!
Before uninstalling the equipment, completely drain the fluid in the reduction line and inside the equip
-
ment.
NOTICE!
For equipment uninstallation procedures, please refer to the installation procedures (see chapter “6 - in
stallation”), proceeding in reverse order.
11.4 - INFORMATION REQUIRED IN CASE OF RE-INSTALLATION
NOTICE!
Should the equipment be reused after uninstallation, refer to chapters:
•
•
Summary of Contents for Dival 600
Page 156: ...TM0023ENG...
