INSTRUCTION
MANUAL
N°530
MAIN FEATURES :
PUTTING INTO SERVICE
TIME
DATE
Watches with automatic movement
wind themselves by the movement of
the wrist.
The watch indicates: hours, minutes,
seconds, date and power reserve. The
power reserve is an indicator of the
autonomy of the mechanism.
Putting into service :
Before wearing the watch or following
a period of inactivity, it is necessary to
wind it manually. To do this, keep the
crown in the normal position, then turn it
clockwise 15 to 20 times. Following this
manipulation, the movement goes up
automatically thanks to the movements
of the wrist. If the power reserve is at its
lowest level, you will have to wind the
watch manually.
Setting the time and the date:
Pull the crown out to the setting position
and turn it clockwise until the desired
time is obtained. Push the crown to its
normal position to complete the setting.
Use a pointed object to press the push
button. Each press advances the date by
one day. Repeat the operation until the
desired date is obtained.
Do not do this setting between 10 pm
and 2 am.
Normal position
Setting position
Date
Seconds
Power reserve
MAX
MIN
Push button
