![background image](http://html.mh-extra.com/html/casio/3316/3316_operation-manual_2570951001.webp)
Operation Guide 3316
1
To set the time
1) Pull the crown out to the second click when
the second hand is at 12 o’clock position
and the second hand stops.
2) Set the hands by turning the crown.
3) In accordance with a time signal, push the
crown in.
To set the date
1) Pull the crown out to the first click.
2) Set the date by turning the crown.
•
Rotate the crown towards you to advance
the right digit, and away from you to
advance the left digit.
3) Push the crown in to the normal position.
•
Note that you will need to adjust the date
setting to 01 at the beginning of each
month.
■
Avoid setting the date between 8:00 p.m. and 1:00 a.m.
(the date display may not change in the following day).
■
For watch with the elapsed time bezel
Rotate the elapsed time bezel to align the
mark with the
minute hand.
After certain amount of time elapsed, read the graduation
on the elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
Elapsed time bezel
•
Some water resistant models are equipped with a screw
lock crown.
•
With such models, you must unscrew the crown in the di-
rection noted in the illustration to loosen it before you can
pull it out. Do not pull too forcibly on such crowns.
•
Also note that such watches are not water resistant while
their crowns are loosened. Be sure to screw the crowns
back in as far as they will go after making any setting.
50
40
30
20
10
3 0
First click
(Setting date)
Second click
(Setting time)
Crown
(Normal position)
MA0306-A