DPP MONO
–
Mod. DPB-1
Istruction Manual
Page 4
Data rev. 28/05/13
Rev. 02
3. INSTALLATION OF THE MACHINE
The machine is supplied with all the parts already assembled except compressed air connection.
Fasten the depannelling machine at a working bench using the fixing system shown in the upon
picture by moving the grip;
The connection of the tube command pedal and of the cylinder have to be done accordingly their
colours as shown in Figure 1 : BLUE (input) e NEUTRAL (output).
Connect the power tube to a compressed air source.
Put the command pedal in a place accessible only to the operator.
The air supply has to be done with low lubricated air at a pressure of 6 -7 bar.
TABLE FIXING
SYSTEM
CUTTING
HEAD
Fig. 1
BLADE
GRIP
NEUTRAL
BLU
BLU
POWER
NEUTRAL
CYLINDER
PEDAL
BLADE
GUIDE
FORK
