PIEPS iPROBE BT 220, Manual, Page: 12 / 17

Manual PIEPS iPROBE BT | 08/2020 12 / 17
SWITCHING OFF & CORRECT FOLDING
The PIEPS iPROBE BT switches off automatically when tension is removed, and the probe is folded.
For switching off and folding proceed the following steps:
•
Press the quick-closing latch to release the lock and pull gently on the probe handle (2A).
•
Start the folding process with the bottom probe tube and fold the next probe tube parallel to the first one
(2B). Push the tube until it stops (2C).
•
Repeat the process with the remaining probe tubes until the PIEPS iPROBE BT is completely folded (2D-
2H).
•
Fix the folded probe with the elastic closure buckle (2J).
2A 2B 2C 2D 2E
2F 2G 2H 2J
NOTICE Always start the folding procedure with the bottom probe tube and always push the probe
tubes until they stop before starting the next folding procedure. This ensures a long life of the
probe cable.