User Manual //
5
WARNING
PIEGA wireless speakers RISK OF ELECTRIC SHOCK! DO NOT OPEN! If the speakers are connected to the mains voltage, a dangerous electrical voltage is present
inside the speakers
-
Use the supplied power cable to connect the speakers to the mains voltage. Make sure that the power supply cable is not damaged; replace it with a new
one if it has been damaged.
-
To reduce the risk of electric shock, do not remove the back panel and never open the speaker housing. Do not expose the speakers to rain or moisture. No
inside parts can be serviced by users. Refer servicing to qualified personnel.
-
Do not operate defective speakers and disconnect defective speakers from the mains voltage. Please contact your PIEGA distributor if you experience any
problems.
Never place a speaker set in an unstable location. A speaker set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the speaker set.
- Only using furniture that can safely support the speaker set.
- Ensuring the speaker set is not overhanging the edge of the supporting furniture.
- Not placing the speaker set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the speaker set to a suitable
support.
- Not placing the speaker set on cloth or other materials that may be located between the speaker set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the speaker set or its controls.
If your existing speaker set is being retained and relocated, the same considerations as above should be applied.
UNPACKING
After unpacking, make sure the system is complete and check the device and all accessories for transport damage. Transport damage may be expected if the pack-
aging is already showing severe wear. Do not attempt to start up a damaged device. If the contents are incomplete or damaged, please contact your PIEGA distributor.
PACKAGING MATERIAL
The packaging has been designed to be used again, as long as it has not been damaged during transport. Keep the packaging and use the original packaging for all
further transport.
The symbol is intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute risk of fire and
electric shock.
The symbol is intended to alert the user to the presence of important operating and mainte-
nance instructions in the literature accompanying this product.
