40
// User Manual
DECLARATION OF CONFORMITY
PIEGA AMP speaker is in conformity with the following directives:
LVD:2014/35/EU
EMC:2014/30/EU
RED:2014/53/EU
ERP:2009/125/EU
ROHS:2011/65/EU
REACH:1907/2006/CE
ERP
PIEGA wireless speakers have two operation modes:
- WIFI input (wireless)
- Analog input
If the local RCA input of speaker is left open, the speaker is set to WIFI mode. By setting the speaker to the same group
(wireless group) as PIEGA connect, a connection from the speaker to PIEGA connect will be established automatically.
Analog mode is active when connecting a music source to local RCA input.
NETWORK STANDBY
After 10 minutes without any incoming music signal from WIFI input (wireless), the speaker will automatically go into a network
standby mode. This is indicated by a red light on operating status display, and the power consumption goes down to 1W.
The speaker will automatically wake up when it receives a music signal, but we encourage you to completely turn off your
speaker when not in use for a longer time.
STANDBY
After 10 minutes without any incoming music signal from Analog input, the speaker will automatically go into a standby mode.
This is indicated by a red light on operating status display, and the power consumption goes down to less than 0.5W. The
speaker will automatically wake up when it receives a music signal, but we encourage you to completely turn off your speak-
er when not in use for a longer time
.
