4
Always read all safety warnings and instructions.
Failure to follow warnings and instructions may result in electric
shock, fire and/or serious injury.
GENERAL MACHINE SAFETY WARNING
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
SAFETY REQUIREMENTS
1. Always follow the instructions in the Picote Solutions manual.
2.
Before each use
inspect the Sentinel Guard carefully for any potential break or damage.
Change damaged sen-
sors immediately.
3.
When in use, it is very important that the Sentinel Guard is stable and on an even surface at all times.
4.
Do not leave the lid open where the Sentinel Guard is being used in wet conditions.
5.
If the working environment is extremely hot and humid, or badly polluted by conductive dust, use a GFCI
-
enabled
power outlet to ensure the safety of the operator.
6.
Only use the Sentinel Guard with the accessories and spare parts offered by Picote Solutions. Accessories and
spare parts should only be used in the manner intended and as described by Picote Solutions.
This section contains important safety information. Failure to comply could result in serious injury or death.
This section contains important safety information. Failure to comply could result in serious injury or death.
TRANSPORT
Sentinel Guard 2.0should be transported in car or other vehicle secured so that any sudden movements caused by hard
braking or accident are prevented. Always tranport Sentinel inside the vehicle.
STORAGE
Sentinel Guard 2.0 should be strored under cover in condensation frost free environment. It is recemmended that Senti-
nel units are stored indoors protected from rain and sunlight and in and constant ambient temperature.
If Sentinel will be stored in colder environment than +10
o
C (50
o
F ), the machine should be stood at room temperature
for 24hours before use.
DISPOSAL
Sentinel Guard 2.0 can be disposed in Europe at Waste Electrical and Electronic Equipment (WEEE) collection points.
Always follow the local waste handling rules and regulation.
ENVIRONMENTAL
Operational Ambient Temperature Range:
-
10...50
o
C (14...122
o
F) frost and condensation free
Storage Ambient Temperature Range:
-
20...60
o
C (
-
4...140
o
F) frost and condensation free
Maximum Humidity:
95% non
-
condensing
