PICOTE MINI MILLER +C 8/16, Operation & Safety Manual

Page: 10 / 34

Due to continuing product development the specifications herein are subject to change without notice!
This section contains important safety information. Failure to comply could result in serious injury or
loss of hearing.
Hand vibration levels depend on the distance from the tool head to the user and working conditions. The
vibration levels detailed below have been measured at the Picote training facilities in Finland. Vibration has been
determined according to ISO
- 5349 and EU - directive 2002/44/EG.
Safe daily exposure time for user:
Exposure Action Value (EAV) 2,5 m/s
2
Exposure Limit Value (ELV) 5,0 m/s
2
VIBRATION
Tooling
Working Distance
m/ft
EAV ELV
Original Cleaning Chain DN32 / 1¼” 0 - 2m / 0 - 6.6ft 50min 3h 18min
Original Cleaning Chain DN32 / 1¼” 5 - 7m / 16 - 23ft 9h 37min Over 24h
Original Cleaning Chain DN50 / 2” 0 - 2m / 0 - 6.6ft 7h 13min Over 24h
Original Cleaning Chain DN50 / 2” 5 - 7m / 16 - 23ft Over 24h Over 24h
Mini Smart Sweeper DN50 / 2” 0 - 2m / 0 - 6.6ft Over 24h Over 24h
Mini Smart Sweeper DN50 / 2” 5 - 7m / 16 - 23ft 17min 1h 8min
Special Drill Head DN50 / 2” 0 - 2m / 0 - 6.6ft 5h 27min 21h 48min
Special Drill Head DN50 / 2” 5 - 7m / 16 - 23ft Over 24h Over 24h
Twister Mini Flexi DN50 / 2” 5m / 16ft 6h 9min Over 24h
Smart Cutter
TM
DN50 / 2” 5m / 16ft Over 24h Over 24h
Cyclone Chain PVC DN100 / 4” 2m / 6.6ft 21h 58min Over 24h
Cyclone Chain PVC DN100 / 4” 5 - 7m / 16 - 23ft 15h 43min Over 24h
10 Picote Solutions Oy Ltd www.picoteinstitute.com
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
NOISE LEVELS, VIBRATIONS & EMISSIONS
The typical A - weighted noise level determined according to EN60745 :
Sound pressure level (LpA): 90 dB (A)
Sound power level (LWA): 103 dB (A)
WEAR EAR PROTECTION
Emissions during actual use of the machine can differ from declared values depending on the ways that the
machine is used. Safety measures to protect the operator should be determined by actual conditions, taking into
account all aspects of the operating cycle (such as when the machine is switched off and when it is running idle).