7
Note:
Before the first time you use the remote controller, please take off the
colorless plastic piece.
Getting Started
Charging the Product
The projector is built in Li-polymer battery for mobile use. Please charge
battery of the projector full before its first use.
Battery Status Monitor
During charging, the battery charge indicator is r
ed. It turns colorless
automatically when the battery is fully charged.
Projecting from External Source
AV IN
1.
Follow the figure below to connect the external AV output device
to the AV jack on the rear panel of the unit. Connection is
color-coded. After connection, ensure that the corresponding AV
signal (e.g.: Composite Video) is enabled.
2.
Enter “Source” on main menu and select “AV” mode.
