XSV
6
Rev. 05/03
Ph:800-421-6511
www.picomacom.com
Controls / Operation / Installation
1.
RF Output:
The VHF output signal is available at this F connector.
2.
RF Input:
The Sub-band input signal should be connected to
this F connector.
3.
Power Indicator:
This LED will illuminate when 18vdc is supplied to unit.
4.
DC Power Input:
This power connection must receive 18Vdc for unit to operate.
5.
Adaptor:
18Vdc output wall mounted power supply.
Front Panel Controls
Do’s & Don’ts
•
Always operate in a cool well-ventilated environment.
•
Always provide a stable, conditioned power source.
•
Heed all safety warnings and obey all environmental and electri-
cal operating requirements.
•
To clean, use a damp cloth only and clean only with mild soap.
•
Do not use solvents or harsh detergents.
•
Do not use this product for purposes other than intended.
Operation & Care
Installation
A
USED FOR TESTING AND MONITORING
1.
Mount unit securely by attaching screws or bolts through mounting
tab of unit and into an equipment rack or other solid structure.
2.
Supply power to the XSV using the supplied power adapter.
3.
Connect the source cable (The one containing the sub band
channel) to the RF input connector of the XSV.
4.
Connect a cable between the RF output of the XSV and the RF
input of a signal level meter or television.
5.
Tune the meter to the desired channel or frequency.*
* Set the meter to channel 7 to monitor channel T-7, 8 to monitor
channel T-8, etc.
A
