2.3
Remote Control Unit
Note: The remote control for your Receiver may differ slightly from the one
pictured and described in this manual, depending on where you purchased
your Receiver. lf you need assistance in identifying the remote control buttons
for specific commands, contact your authorized dealer.
Refer to the numbers shown on the picture.
1.
POWER:
To turn on the working mode or to place the unit on standby mode.
2.
SAT:
To select the satellite channel list.
3.
ZOOM:
To increase the picture size.
4.
OK:
To select an item in the menu and confirm it.
5.
CH+/–:
To switch the channels and view the channel information.
6.
EXIT:
To cancel or exit from the menu.
7.
MENU:
To enter into the main menu or exit all menus.
8.
FAV:
To switch the receiver to the favorite channel list.
9.
RECALL:
To return to the previous channel selected.
10.
EPG:
To view the current channel information and Electronic Program Guide.
11.
MUTE:
To mute (minimize) the volume level.
12.
Alphanumeric character keypad:
To input channel number to select a
channel directly, or to input other data in the menu.
13.
FAV+/–:
To switch through the favorite channels.
14.
VOL+/–:
To adjust the volume level, change settings or move left and right
in the menu.
15.
AUDIO:
To select the audio mode: left, right, or stereo and audio language
in the menu. (Note: Exit all menus before using the audio key.)
16.
PGUP:
To move cursor a page up in the menu or channel list.
17.
PGDW:
To move cursor a page down in the menu or channel list.
18.
INFO:
To view current program information.
19.
TV/RADIO:
To switch the receiver between TV and Radio modes.
20.
PAUSE:
To pause a picture in TV mode.
2.3
Remote Control Unit
9
CONTROLS AND FUNCTIONS
