CONTACT US
858.546.5050
www.
picomacom
.com
PICO MACOM
Fiber Optic
Series
Chapter 2
Specifications
1.
RF Performance
SPECIFICATION
LIMITS
Frequency Range
5 to 200 MHz
Connector
F-connector, female
Impedance
75 ohm
Output Return Loss
> 8 dB
Output RF Level
> 45 dBmV
RF Output Control Range
> 10 dB
RF Frequency Response (Flatness)
+ 1.5 dB
Carrier–to-Noise Ratio
> 50 dBc*
Composite Second Order (CSO)
> 60 dBc*
Composite Triple Beat (CTB)
> 65 dBc*
Rear Panel Test Port Level
-20 dB from primary output, typ.
* Results typical, based 0 dBm Optical Return Receiver input level.
2. Optical Performance
SPECIFICATION
LIMITS
Wavelength
1290-1600 nm.
Input Level
-2 to +1 dBm
Output Connector
SC/APC (FC/APC optional)
Return Loss
> 45 dB
3. General
SPECIFICATION
LIMITS
Input Power
90 VAC to 264 VAC at 47 Hz to 63 Hz, 30 watt typ.
Power Cord
Standard: NEMA 15P to IEC320 male on chassis.
Special order possible
Fuse
5MF 500/250V (BEL) (spare in IEC320 socket)
Temperature Range
-10 to +50°C (+40°C max. recommended)
Relative Humidity (non-condensing)
0 to 95%
Altitude
0 to 15,000 ft
Weight
PRR-1: 7.2 lb.| PRR-2: 7.5 lb. | PRR-4: 8.2 lb.
Size:
1 RU (1.75”)H x 19”W x 13”D
