Common failure
Cause analysis
Solution
After power
connecting, switch
it on and the Juicer
doesn’t work.
1.Center ring was not
installed in place.
2. Top cap was not installed in
place.
3. Microswitch is broken.
1. Put the center ring in
place.
2. Put the top cap in place.
3. Replace top cap.
4. Put all parts in place.
Motor gives out
disguising smell
during the first few
times of use
Normal phenomenon
If the smell remains after
using for several times,
please contact us via email.
Stop during
operation
1. The voltage is below level.
2. Ingredients are excessive.
3. Exert excessive pressure to
press the pusher.
4. When the motor is
overheating, the motor will
have protection.
1. Check if the voltage is
too low.
2. Disconnect power source
and take redundant
ingredients out.
3. Lightly press the pusher.
4.Switch it off for 20-30
minutes before use it again.
Fruit contains much
pomace
1. Juicing sieve is broken.
2. Too much pomace
accumulated in the center
ring.
1. Replace the broken
juicing sieve.
2. Replace the center ring.
Only a little fruit
juice comes out
1. Too much pomace
accumulated in the center ring
2. Exerted large pressure on
the pusher.
1. Clean the center ring.
2. Lightly press the pusher.
14
Chapter VII. Trouble Shooting