The Juicer is designed with a double safety system and can start working
only after all parts are installed correctly.
Please install and use the Juicer as follows:
1
Groove on the juicing body is aligned with
convexity on the Main body. Place the
juicing body on the Main body.
2
Pomace outlet on the juicing sieve
(compound net) is aligned with the pomace
outlet on the juicing body.Place the juicing
sieve into the juicing body.
(Please make sure that the red sealing
gum is inserted into the groove of
pomace outlet completely)
3
The spiral propeller is inserted into the
center of juicing sieve.Press the spiral
propeller with a decent strength to make the
spiral propeller properly inserted into the
base hole.
7
Chapter IV. How to Assemble
