Picard LP-200-3-20S, Operation, Maintenance And Parts Manual

Page: 14 / 28

14
PICARD TUNNEL OVEN MAINTENANCE
LUBRICATING THE CHAIN FOR CONVEYOR
1. Set the temperature to 180 ˚F or 83 ˚C.
2. Remove the exit guard to access the chains.
3. Turn ON the conveyor to its maximum speed.
4. Use the jog buttons to turn move forward the conveyor.
5. Use graphite based oil on its entire length at the 4 places indicated by the arrows on the
drawing above.
CLEANING UP THE CONVEYOR
1.
Lower the oven internal temperature to 150 ˚F or 66 ˚C.
2. Remove the exit guard.
3. Turn ON the conveyor to its maximum speed.
4. Clean up the conveyor with one of the scrapers sent with the oven. Afterwards, clean it
up again with a rag and warm water.
HOW TO REMOVE THE ENTRY CONVEYOR FOR CLEANING
Exit guard