Picard LP-200-3-20S, Operation, Maintenance And Parts Manual

Page: 10 / 28

10
PICARD TUNNEL OVEN OPERATING, INSTALLING AND
TECHNICAL SERVICE :
Operational information on this equipment has been prepared to be used by a qualified and/or
authorized operating personnel. All installation and/or service on this equipment is to be
performed by qualified, certified, licensed and/or authorized installation or technical service
person.
Service may be obtained by contacting the factory service department, factory
representative or local service agency.
DEFINITIONS :
- QUALIFIED INSTALLATION PERSONNEL
:
Qualified installation personnel can be represented by; an individual, a firm, a corporation or a
company which, either in person or through a representative is involved and is responsible for:
1.
The installation of electrical wiring from the electric meter, main control box or service
outlet to the electric appliance. The qualified installation technician must be experienced in
such work, be familiar with all required precautions, and have complied with all
requirements of state or local authorities having jurisdiction.
2.
The appliance, when installed, must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electrical code ANSI/NFPA 70,
or the Canadian Electrical code, CSAC22.1 No 109 or conform to UL STD 197.