E
n
g
li
s
h
28
H07024510 / DT2000575 - Rev. 00
Log size
The size of the wood logs can also affect the efficiency of the product.
It is essential for the wood to be arranged on the grate on top of a
layer of embers.
The logs must not touch the aluker or the glass window nor must
they be put on top of each other. Place the wood as shown in the
figure 34.
We therefore recommend using logs of the following size:
- perimeter approx. 30/35 cm;
- lwength approx. 20–25–30 cm according to the type of hearth.
Under no circumstances use liquid fuel of any kind
whatsoever.
All these materials or similar ones could be hazardous for the
user, damage the firebox, the flue connection and the flue,
and, last but not least, pollute the environment
Perimeter
Le
ng
ht
Fig. 34
DT20300063-00
DT2011210-00
5.2
SMOKE DAMPER REGULATION
(*) Position referred to a draught of 12 Pa
When lighting the firebox, put the damper to the open “APERTO” position until a bed of embers has been formed.
Once the firebox is properly lit, put the damper to the operating position, which may vary according to the atmospheric conditions, the type
of flue and consequently the draught. You will learn by trial and error which is the best position for the smoke damper.
Before putting in any logs, always set the damper to the open “APERTO” position. After having put in the wood, set the damper
back to the functioning position.
A
C
B
Fig. 35
DT2030515-02
SMOKE DAMPER POSITION
FIREBOX IN OPERATION AT NOMINAL POWER
LIGHTING OR STOKING-UP OF FIREBOX
600 HT
CLOSED ()*
OPEN
610 HT
CLOSED ()*
OPEN
650 HT
OPEN (*)
OPEN
655T HT - 655E HT
OPEN (*)
OPEN
Damper positions: closed (
A
), 1/2 open (
B
), open (
C
).
